The contractor-grade gutter tool
Clean gutters faster. Move your ladder less.
The Gutter Hawg screws onto any standard extension pole and pulls leaves and debris out from under gutter hangers, so you can clean up to 20 feet of gutter from one ladder position.
- Made in the USA
- Contractor-grade
- Fits standard poles
Why it works
One tool. Two ends. No leaning.
Built for the spots a gloved hand can't reach.
Scoop end
A flat scoop pulls leaves, needles and muck straight toward you, section by section.
Hook end
Flip it over and the hook reaches under gutter hangers to drag out what's trapped there.
Up to 20 ft per setup
Clean up to 20 feet of gutter without moving your ladder. Fewer trips up and down.
Hangs on your ladder
Hook the pole on a rung so both hands are free while you climb.
Reaches behind skylights
Use the hook to clear debris behind skylights and other structures on the roof.
Fits standard poles
Screws onto standard threaded paint and extension poles. Pole not included.
How it works
Scoop it. Hook it. Grab it.
The same steps printed on every Gutter Hawg label.
Attach and set up
Screw the Gutter Hawg onto any standard paint pole or extension pole. With your ladder safely in place, start at the section of gutter closest to you and work away from yourself.
Scoop toward you
Use the scoop end to pull debris toward you until you reach a gutter hanger.
Flip and hook
Flip the tool over and use the hook to pull debris out from under the hanger, then keep pulling it toward you. Repeat at each hanger.
Grab and move on
Once the debris is close enough to grab safely, remove it and go on to your next section of gutter.
Hang it, climb hands-free
Hang the pole on your ladder using the hook so your hands are free to climb safely. The hook also cleans behind skylights and other roof structures.
Gear up first
Always wear safety gloves and use ladder stabilizer bars.
Watch our video
See the hook get under the hanger.
Watch how the scoop end pulls debris toward you and the hook clears what is trapped under each gutter hanger.
Shop the Gutter HawgDoes it come with a pole?
No. The Gutter Hawg is the tool head only, and the extension pole is not included.
What poles does it fit?
It screws onto any standard threaded paint pole or extension pole with acme thread.
How much gutter can I clean from one ladder position?
Up to 20 feet of gutter without moving your ladder, depending on your pole length and setup.
How do I get debris out from under gutter hangers?
Pull debris with the scoop end until you reach a hanger, then flip the tool over and use the hook to pull the debris under the hanger toward you. Repeat at each hanger.
Is it for homeowners or contractors?
Both. It's a contractor-grade tool, so it holds up to everyday crew use and is easy for homeowners too. Multi-packs are a good fit for crews and for keeping a spare on every truck.
Where is it made?
The Gutter Hawg is made in the USA.
What safety gear should I use?
Always wear safety gloves and use ladder stabilizer bars. Never lean out from your ladder.
Gutter season doesn't wait.
Grab a Gutter Hawg for the house, or stock the truck for the whole crew.